| Product name | 35FT Electrical Power Pole Distribution For Philippines Project With Octagonal Setion Shape |
| Material | ASTM 572 grade 50 with yieled strength mo less than 450mpa |
| Design service | available,just offer design parameter |
| Certificate | ISO 9001:2008,etc |
| Destruction test | Available |
| Welding method | AWS D1.1 with penatration rate no less than 80%-100% |
| OEM | Available |
| Wind pressure | 5-300KM/H |
| Pre-shipment test | Available |
The products made by us is high resisitivity against heat ,humidity ,moisture,
water etc. Owning to use the rare earth special craft during the production
process, to ensure its high precise, good quality and competitive advantage.
Meanwhile, we can accept the product type damage test to ensure the high
safe factor of our products. Because of good quality and competitive price
caused by innovation and management reform, experienced service in
fabrication ,design, installment, consultancy, we have built long-term relationship
with many countries, such as America ,Morocco,Sir Lanka ,Russia, Jordan,
Guyana,Nigeria, Australia, Spain, Indonesia, Singapore, the Philippines, Kenya,etc.
Technical Property of the 35FT Electrical Power Pole
1.mechanical Property
The metal supports are designed to withstand the nominal force F and the pressure of the wind
V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic
limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V)*1m. Tests
shows the load intervened when breaking is around 2 (two) times of design.
2.steel
The material is in accordance with NF EN 10025 Standard and NF EN 10149 Stabdard,
it has the dollowing property
---Yield strength =355 N/m
---Toughness remains the same under 20 degrees below zero
---Glavanization is in accordance with NFA35503 Standard Class
3.Glavanization
---Stand: NFA91121
---Average thickness of the galvanization : not less than 86 μm
4. Manufacture Tolerance
---Componet Length:-25mm to 75mm
---Stranghtness: 2mm/m
---Twisting degree: 1° per 3 meters length
---Ovalisation: Maximum is 3%
---The average diameter : +/-0.5%
---Slip length: +/-150mm
5.Standaed Accessory
---Top plate
---Base plate
---Bottom strip
---Climbing rung
---Anchor bolt
---Bitumen marking
---Removable ladder
6. The information to inquiry or purchase
---Steel pole height and force
---Cross arm type and length, the position to install in the steel pole
---The method to fix the cross arm (use Bolt to connect or use one or two template to weld in
the steel pole to install the cross arm)
---Safety factor of the steel pole.
---wind speed
---Type of climbing rung
---Destination port
Product Tags:
|
|
35FT Power Distribution Pole For Philippines Project With Octagonal Setion Shape Images
|
